Home Advertisements Restoration Galleries My Car VIN Decoder Links Email Me
Where am I in my restoration now?View my modified 289 V8View my car's interiorView My car's exteriorView my floor replacement

My Car - Snapshot!

Late July 2001

Time left until car goes into body shop for paint:

Welcome to the SNAPSHOT!!!!! section. Here, I will post new pictures of my car as I progress in my Ford Falcon restoration, with big plans for the future..........

In this section, I hope to chronicle the restoration process.  Hope you enjoy the show, and email me if you have any ideas!

I took a week off this July to install a new floor in my Falcon.  As you can see in the pictures below, my floor had a LOT of holes under multiple layers of sheet metal patches.

Thanks to helpful folks down south in St. Louis, I brought a relatively rust free floor out of a 4 door.  After pressure washing the floor, I found it never had undercoating applied to it, and still wears its factory primer.  The dusting of surface rust pales in comparison to the underside of the pans, which I would EAT off of!


The floor was welded in place, and I used Epoxy paint and POR 15 to seal the floor from possible rust.

Mike in Chicago

Back to Top